Multi 5 Bale Feeder

The McIntosh Multi 5 Bale Feeder has been designed to incorporate strength, ease of use and years of trouble free use. With a spear loading system and low centre of gravity, the McIntosh Multi Bale Feeder leads the way in feeding out machines.

The Multi Bale Feeder with spear loading system features two box sections running through the cradle for greater strength and a lower centre of gravity rather than having the feeder on top of the chassis runners. With a lower centre of gravity, the tyres can be kept in closer towards the centre of the Bale Feeder. Also with the wider cradle there is a much smaller chance of running over the product even when there is a strong wind and in muddy conditions.

Standard Features

  • 2300mm wide cradle to get feed away from tyres
  • 3" 12,000lb zinc - plated roller chains
  • 1’’ high tensile bar drive dog pins (direct drive)
  • Larger heavy duty motor 1-1/4" drive shaft - 3000PSI
  • 60mm hubs
  • 5mm thick medium tensile end plates
  • Bolt on slats
  • 8 tooth sprocket for longer life and better drive
  • Covered drive shaft to stop silage getting caught
  • Bronze bushes on drive shaft - no bearings
  • Dual aggression pins
  • Swivel drawbar 45mm eye
  • Fully enclosed galvanised plate floor
  • Easy access grease points
  • Low maintenance and long life
  • Feeds out either side
  • Platform to help pull net off
  • Heavy 8mm thick angle slats for better ripping of bales
  • Tyres - 400/60 - 15.5 tractor tread
  • Teeth are bent for better ripping of bale
  • RHS through cradle for better stability
  • Mudguard protection
  • Diverter valve so only two hydraulic banks are required for three operations
  • Square side frame on cradle, this helps to keep feed away from tyre
  • Two boxes to hold wrap and netting
  • Galvanised floor fully enclosed
  • Low Maintenance

Optional Extras

  • Brakes - Front Axel
  • LED Lights
  • Square bale attachment kit
  • Square bale attachments for loading arms
  • Lid on front waste box

Specifications

Overall Width (mm)2300
Overall Length (mm)8140
Overall Height (mm)1100
Axles StandardTandem
Track Width (m)1.62
Tare Weight (kg)2460
Tyre Size

400/60-15.5

All equipment is guaranteed for a period of 12 months from date of entering service, provided that such equipment has not been subject to improper usage and/or overloading or any other conditions contrary to the manufacturers specifications or recommendations. Specifications subject to change without notice. Estimated weights are based on a standard configuration and may change if options are added or removed.