Forage Wagons

You expect your farm machinery to go the distance, and McIntosh delivers with Forage Wagons built to the highest quality standards. We’ve thought about the rugged and unpredictable conditions on so many New Zealand farms and engineered a range of Forage Wagons that won’t let you down when the going gets tough. McIntosh offered one of the first Forage Wagons on the New Zealand market, and we continue to have a proven track record for strength and reliability.

Every detail has been carefully thought out and designed to provide trouble-free operation for years to come. Our Silage Wagons are built with a true bathtub design. The narrower body is ideal for feed pad work, while still being stable on rolling country. Fully welded sides and 5mm steel floor gives our wagon superior strength and durability with no bolted or riveted joints. The elevator angle allows the front of the wagon to be fully loaded against, and it will start every time without the need to back the load off. The steep elevator design ensures the load is broken up and lifted over, not carried over in lumps. This gives a more consistent feed out on the ground.

Standard Features

Floor chains: Three on the 900 - 1400 models and two chains on the 500 - 700 models. The Titan 800 comes with either 2 or 3 floor chains.

Individual chain adjusters with a 40mm shaft and 24mm threaded rod.

Heavy duty back door made of 50 x 50 box section to help prevent bending.

True bumper bars with extra brace on the corner to strengthen and protect the conveyor.

Standard chassis on the 500 - 900 models, with ladder.

Stepped chassis to reduce overall height with the larger tyres on 1000 - 1700 models, with ladder.

Cross conveyor slides out 200mm for rough feeding either manually (standard)or by the optional hydraulic ram.

40:1 German reduction gearbox for the floor drive eliminates the use of chains and sprockets, delivering more power direct to the floor.

All machines are sandblasted and sealed prior to the application of our high quality paint system with a two pack finish to give a durable long life finish.

Vertical elevator with adjustable angle. More angled elevators with more weight on them can be harder to start unloading when a full load is one top of them.

13mm floor and elevator chains used on the Titan Series, giving it double the strength of the 10mm used on the Multicrop Wagons.

Large 13mm chain sprockets used on the Titan Series for longer life and less maintenance.

Tyre options available.

400/70 - 22.5
385/65 - 22.5
400/60 - 22.5

Grease line makes greasing of the axle pins a simple job, with no need to get under the wagon or remove mud from the grease nipple to grease it.

Tracking strip on Cross Conveyor.

Optional Extras

4 floor Chains	RHS Mudguard protection
4 elevator Chains	Pivoting cross conveyor extension
Brakes off tractor foot pedal or remote	Brakes on 2 or 4 wheels - hydraulic or air
Cross conveyor Belt 1200mm wide Roller chain 900mm or 1200mm wide Hydraulic conveyor extension 200mm	Load cells on 4 points with optional Alarm Dummy load cells / Conversion kit Remote Display
Electric floor speed control	Swivel draw bar tongue
Gearbox or chain elevator drive	Truck axles
Topper Boards	Skid 300mm long
Grease gun holder with grease gun	Rear idler Remote Grease Lines
LED lights	Walkway length dependent on model x 250mm wide.
Suspension - Airbags or springs	Tyre size options

Standard plate tongue makes hitching up easier using the quick hitch. Optional swivel tongue is idea for rougher country.

Optional 1200mm cross conveyor has a larger opening to help with feeding out square and round bales.

Chain cross conveyor requires less maintenance and a belt conveyor and has a larger valve and separate speed control. Reduced noise as the chains run on nylon on the top and bottom of the frame.

Pivoting cross conveyor extension for feeding over troughs and fences has two lifting rams, separate hydraulic motor and tracking strip on the belt.

European load cells protected with steel covered load cell display and screen that turns to the side when loading.

Bolt on 300mm long skid.

Electronic floor speed control mounted n the tractor.

RHS mudguard protection

Remote load cell display mounted in the tractor cab.

Four floor and/or four elevator chains optional on all wagons and standard on the Titan 1700 and 1900.

Hydraulic or air brakes with extra adjustable external return springs to ensure brake pad release.

250mm wide walkway helps with loading bales and minerals.

Multicrop & Titan Specifications

The 500 - 1400 models are available as either a Multicrop or Titan Wagon. All Titan wagon dimensions are the same as the Multicrop but are fitted with; 13mm floor and elevator chains, larger diameter sprockets, larger floor and elevator shafts, bigger gearboxes and optional higher flow oil valves.

	500	600	700	800	900	1000
Cubic Capacity (m³)	7.8	9.1	10.1	12.4	14.3	16
Cubic Tonne (approx.)	5	6	6.75	8	9	10.5
Overall Width (m)	2.35	2.35	2.35	2.35	2.45	2.45
Overall Length (m)	6.00	6.60	7.05	7.05	7.80	8.5
Loading Height of Bin (m)	2.21	2.21	2.21	2.58	2.60	2.6
Axles Standard	Single	Tandem	Tandem	Tandem	Tandem	Tandem
Track Width (m)	2.24	2.20	2.20	2.24	2.24	2.4
Tare Weight M/C (approx. kg)	2080	2562	2702	2902	3286	4312
Tyre Size	12.5/80-15.3	11.5/80-15.3	11.5/80-15.3	12.5/80-15.3	15/70-80	385/65R22.5
Cross Conveyor Height (mm)	650	650	650	750	750	730
Floor Chains	2	2	2	2 or 3	3	3
	1200	1400	1500	*Titan 1700	*Titan 1900
Cubic Capacity (m³)	17.6	20.2	21.5	24.8	27.2
Cubic Tonne (approx.)	12	13.6	14.6	17.5	19
Overall Width (m)	2.45	2.75	2.45	2.94	2.94
Overall Length (m)	9.10	9.10	9.10	9.40	10.0
Loading Height of Bin (m)	2.60	2.60	2.90	2.95	2.95
Axles Standard	Tandem	Tandem	Tandem	Tandem	Tandem
Track Width (m)	2.40	2.70	2.40	2.94	2.94
Tare Weight M/C (approx. kg)	4850	5205	5285	5835	5980
Tyre Size	385/65R22.5	385/65R22.5	385/65R22.5	500/60-22.5	550/60-22.5
Cross Conveyor Height (mm)	730	730	730	740	740
Floor Chains	3	3	3	4	4

* The 1700 and 1900 wagon is only offered in the Titan range.

All equipment is guaranteed for a period of 12 months from date of entering service, provided that such equipment has not been subject to improper usage and/or overloading or any other conditions contrary to the manufacturers specifications or recommendations. Specifications subject to change without notice. Estimated weights are based on a standard configuration and may change if options are added or removed.