Multi 4 Bale Feeder

McIntosh Double Bale Feeder

The McIntosh Multi Bale Feeder has been designed to incorporate strength, ease of use and years of trouble free use. With a spear loading system and low centre of gravity, the McIntosh Multi Bale Feeder will lead the way in feeding out machines.

The Multi Bale Feeder with spear loading system features two box sections running through the cradle for greater strength and a lower centre of gravity rather than having the feeder on top of the chassis runners.  With a lower centre of gravity, the tyres can be kept in closer towards the centre of the Bale Feeder. Also with the wider cradle there is a much smaller chance of running over the product even when there is a strong wind and in muddy conditions.

STRENGTH / QUALITY / PERFORMANCE

Standard Features

BACK TO TOP

Loaded with 3 round bales. A fourth bale can be carried on the rear spears. This bale feeder is fitted with the optional 11.5/80-15.3 tractor tread tyres. 

Loaded with two round and one eight foot square bale

With the yellow slat located on top of the cradle, the rolling teeth are set in the loading position. The rolling teeth ensure the bale doesn’t get stuck when being pushed onto the cradle which makes loading a breeze

Once the bale is loaded onto the tray the back stop pushes the bale forward and returns for the next bale

The double ram loading system lowers the bale gently all the way to the cradle without sudden drops

Diverter valve which changes the oil flow from loading spears to the sliding frame which pushes the bale along

Steel box to hold plastic wrap. The galvanised mesh floor allows water and dirt to fall out and reduces the smell compared to an enclosed box

  • 1’’ high tensile bar drive dog pins (direct drive)
  • 3" 12,000lb zinc - plated roller chains
  • 5mm thick medium tensile end plates
  • 8 tooth sprocket for longer life and better drive
  • Bolt on slats
  • Bronze bushes on drive shaft - no bearings
  • Covered drive shaft to stop wrapping of silage
  • Diverter value so only two hydraulic banks are required for three operations
  • Dual aggression pins
  • Easy access grease points
  • Feeds out either side
  • Fully enclosed galvanised plate floor
  • Heavy 8mm thick angle slats for better ripping of bales
  • Large heavy duty motor with 1 1/4" drive shaft
  • Low maintenance
  • Stand to help pull net off
  • Swivel drawbar
  • Teeth are bent for better ripping of bale
  • Tyres - 11.5/80-15.3

Optional Extras

BACK TO TOP
  • Square Bale Attachment
  • Trough extention arm
  • Tyres - 11.5/80-15.3 tractor tread
  • 400/60-15.5 semi aggressive or tractor tread

Specifications

BACK TO TOP
Overall Width (m)2.30
Overall Length (m)6.94
Overall Height  (m)1.10
Axles StandardTandom
Track Width (m)1.62 
Tare Weight (kg)2180
Tyre Size11.5/80-15.3
honeypot@spinningplanet.co.nz